Shop

The AirGen series KZA FID Air is able to remove the total hydrocarbons to less than 0.05 ppm from the external compressed Air. Very compact, the KZA FID Air can purify up to 15 L/min of compressed Air and can bear a pressure up to 7 bar (101 PSI). The filtration of the hydrocarbons is performed by using a catalytic oven filled with palladium.

The reduction of hydrocarbons, including methane, and carbon monoxide decrease the background noise level and gives much better baseline stability, considerably increasing detector sensitivity and ensuring precise analytical results. High efficiency coalescing pre-filtration and post filtration of particulate size greater than 0.01 microns are used to prevent any kind of particles from entering the analytical device.

The KZA FID Air has a very simple and efficient interface. It can also be managed by the Hydrogen  series KUBE is ideal to supply Hydrocarbon free Air to FID detectors.

The AirGen series KZA FID AIR V2 is able to remove the total hydrocarbons to less than 0.05 ppm from the external compressed Air. Very compact, the KZA FID AIR V2 can purify up to 3 L/min of compressed Air and can bear a pressure up to 6.5 bar (94 PSI). The filtration of the hydrocarbons is performed by using a catalytic oven filled with palladium.

The reduction of hydrocarbons, including methane, and carbon monoxide decrease the background noise level and gives much better baseline stability, considerably increasing detector sensitivity and ensuring precise analytical results. High efficiency coalescing pre-filtration and post filtration of particulate size greater than 0.01 microns are used to prevent any kind of particles from entering the analytical device.

The KZA FID AIR V2 has a very simple and efficient interface. It can also be managed by the Hydrogen  series KUBE is ideal to supply Hydrocarbon free Air to FID detectors.

The HydroGen series HG 5U PRO 2000 is able to generate 2000 cc/min of Hydrogen with purity better than 99.99999% and pressure up to 16 bar (232 PSI). The HG 5U PRO includes an electrolytic cell with polymeric membrane (PEM) using distilled water. The two-column PSA drying system with automatic regeneration ensures the maximum grade of hydrogen purity, and is completely maintenance-free. The HG 5U PRO is the ideal Hydrogen for all GC-FID detectors. The on-board CPU constantly controls the operating parameters to guarantee full safety. The touch-screen LCD interface provides simple and user-friendly management of all functions on the unit.

Reliable, sustainable and flexible
Introducing the Lyovapor™ L-210, equipped with our cutting-edge EcoStream™ and Infinite-Control™ technologies. The timesaving Lyovapor™ L-210 sets new efficiency standards while maintaining exceptional, reliable, and stable cooling performance. Designed with advanced automation and flexibility, the Lyovapor™ line not only reduces drying time but also minimizes environmental impact.

Key specifications

Maximize sustainability and freeze-drying efficiency with EcoStream™
Introducing the Lyovapor™ L-250, featuring our groundbreaking EcoStream™ technology: the most eco-friendly freeze-drying solution for your laboratory. Our innovative cooling technology significantly lowers the environmental impact of the instrument without compromising our commitment to quality and reliability. BUCHI’s commitment to enhancing the sustainability of laboratory processes is certified with the ACT label for L-250 Basic and L-250 Pro configurations.

Key specifications

First lab Freeze Dryer for continuous sublimation
With Infinite-Technology™ the Lyovapor™ L-300 offers continuous sublimation for the first time with two alternately working and automatically hygienically cleansed condensers at -105 °C. In addition, Infinite-Control™ allows entire process control of all relevant parameters, also via mobile devices.

Key specifications

</table

Outstanding Performance, Flexible Configuration and Reliable Results

The MB23 provides precise moisture content determination at an unbeatable value. With a large backlit LCD display, standard RS232 port, 110g capacity with a readability of 0.01g/0.1% and a non-glass infrared heating element, the MB23 offers moisture analysis for any budget.

Outstanding Performance, Flexible Configuration and Reliable Results

The MB25 provides precise moisture content determination at an unbeatable value.

With a large backlit LCD display, standard RS232 port, 110g capacity with a readability of 0.005g/0.05%
and halogen heating, the MB25 offers moisture analysis for any budget.

Perfect for Routine Moisture Testing

The new OHAUS MB32 features a redesigned housing with stronger material,
innovative carbon fiber heating technology, and an upgraded load cell for enhanced durability and performance.

The easy-to-use MB32 is the perfect choice for routine moisture testing.

Designed for Durability and Flexible Performance in a Variety of Moisture Applications

MB62 features a redesigned housing, innovative carbon fiber heating,
and upgraded load cell for enhanced durability and performance.

With flexibility in method creation, settings, and data access, MB62 is suitable for a variety
of moisture applications in numerous industries.

High Performance Moisture Analysis with Advanced Features for the Most Demanding Application

The new MB92 features a redesigned housing, innovative carbon fiber heating, and upgraded load cell for enhanced durability and performance. Ideal for users demanding a higher level of performance on both the laboratory and production floor, offering greater data security and integrity with password protection.

The Ideal Solution for Dependable Vortex Mixing of Microplates

OHAUS Microplate Vortex Mixers are perfect for mixing microplates throughout the speed range. All models are designed for continuous-duty use in the lab. Digital models offer a timer and exact speed control for applications that demand repeatable results, while non-digital variable speed models are an economical alternative. The high-speed and small orbit of these mixers make them optimal for effectively mixing microplates.

A high-performance purification system with built-in support

Milli-Q^® CLX 7000 analyzer feed systems provide an economical and high-performance water purification solution for pure water needs of up to 3000 liters per day. Water produced complies with the Clinical and Laboratory Standards Institute^® (CLSI) guideline for clinical laboratory reagent water (CLRW).
These high-throughput biomedical water systems are designed to maximize your lab’s productivity by integrating our state-of-the-art purification technologies and delivering an unprecedented level of system accessibility and service, including:

• MyMilli-Q™ Remote Care online monitoring and service capability
• Tailored Milli-Q^® Services Plans for expert support and to extend your system’s lifetime
• Pre-installation feed water analysis to maximize your system’s performance

CLRW quality water for clinical analyzers

Milli-Q^® CLX 7000 systems combine patented purification technologies to ensure constant water quality with low and predictable running costs. Our Elix^® electrodeionization (EDI) module contains self-regenerating ion exchange resins that require no maintenance, such as the need to change resin cylinders. Unique E.R.A.^® (Evolutive Reject Adjustment) technology automatically optimizes water recovery based on feed water quality, decreasing your water usage costs by up to 50%. Plus, 3 built-in bactericidal UV lamps reduce system and analyzer sanitization needs to maximize lab uptime.

Designed for ease of use, including interactive touchscreens

Milli-Q^® CLX 7000 systems are designed to save users time and effort:

• A large, user-friendly color touchscreen shows all important system information at a glance and allows for intuitive operation
• Step-by-step instructions on the touchscreen support fast and easy maintenance
• RFID technology ensures automatic traceability of consumables

The Milli-Q^® CLX 7000 systems are compact and mounted on wheels, so that they can be installed wherever it is convenient in the laboratory. Systems are also customizable, allowing you to adapt them to your specific requirements (for example, by adding a TOC monitor).

Supported by MyMilli-Q™ Remote Care online monitoring and service capability

The outstanding, rapid service of Milli-Q^® Services includes a remote connection capability. MyMilli-Q™ Remote Care is already onboard your Milli-Q^® CLX 7000 system and functions as a secure online portal that simplifies the management of your system and supports optimal lab productivity.
Key features of MyMilli-Q™ Remote Care:

• 24/7 secure online access to real-time system performance data as well as quality reports archived over the last 2 years
• Rapid, online diagnostics—and even remote repair—by our service team
• Receive immediate and customized notifications of system alerts and alarms by email and/or SMS
• Full data traceability as well as effortless data access and retrieval capabilities facilitate accreditation and reaccreditation processes (e.g., CAP 15189^SM accreditation to the ISO 15189:2012 standard)

Quality certificates

For full confidence in your Milli-Q^® CLX 7000 system, it is delivered with a Certificate of Calibration for the built-in temperature and resistivity meters, and a Certificate of Conformity ensuring that it has been built and tested fully assembled following internal Standard Operating Procedures. The manufacturing site is ISO 9001 v.2015 and ISO 140001 certified.

The Milli-Q^® HR 7000 series of connected, high-throughput systems are designed to deliver a powerful, versatile and modern central pure water solution. From a single laboratory to an entire research facility, the Milli-Q^® HR 7000 range has the capacity to purify up to 3000 L/h from tap water, reliably feeding all your type 3 water needs. This includes taps on benches, instruments, point-of-use polishers, and ultrapure water purification systems.

Key features of the Milli-Q^® HR 7060 / 7120 / 7170 / 7220 systems include:

• Advanced purification technologies for constant flow rate and reduced water consumption
• Superior ergonomic design for quick and easy maintenance
• An interactive touchscreen with helpful wizards for ease of operation and maintenance
• Modern data management capabilities for greater accessibility and data traceability
• MyMilli-Q™ Remote Care online monitoring and service capability

Milli-Q^® HR 7000 water – Sustainable purification

With advanced and complementary purification technologies, the Milli-Q^® HR 7000 series yields reliably pure water at a constant flow rate and with reduced water consumption.

Tap water is first pretreated according to your facility’s source water quality. Progard^® cartridges efficiently remove particles, colloids, free chlorine and hardness. Additional carbon and ultrafiltration systems may be supplemented as per your feed water quality.

Advanced reverse osmosis (RO) then removes 95-99% of ions, and 99% of all dissolved organics (>200 Da), microorganisms and particles.

Milli-Q^® HR 7000 systems are equipped with our patented E.R.A.^® (Evolutive Reject Adjustment) technology to save you water, time and money. E.R.A.^® automatically assesses feed water quality to produce a constant flow rate and optimize water recovery (between 45 and 75%). The result is reduced water consumption—by up to 50% compared to other RO systems of similar throughput—and less time needed to maintain the system as there is no need for manual valve adjustments due to temperature fluctuations.E.R.A.^® also prolongs the lifetime of the RO cartridge for reduced consumables waste.

Versatile configuration

Depending on daily volume needs, Milli-Q^® HR 7000 systems are available in production flow rates of 60, 120, 170 or 220 L/h. Achieve higher throughput by linking up to 3 units to reach up to 3000 L/h of Type 3 water from potable tap water.

Milli-Q^® HR 7000 systems can be adapted and integrated into almost any lab or building configuration. The systems are capable of driving and controlling all ancillary equipment needed for a complete installation, including distribution pumps and loops, alarms, monitors, UV lamps and sanitization modules.

For a compact and clean solution, the Milli-Q^® HR 7000 offers plug ‘n’ play compatibility with our SDS 500 storage, protection and distribution system. This perfect pairing yields high storage and distribution flow possibilities.

Modern control panel

Milli-Q^® HR 7000 systems are equipped with a large, colored touchscreen display panel to facilitate maintenance, control and access to data. The user-friendly interactive dashboard lets you easily navigate to all main system data, including:

• System settings
• Production
• Storage levels
• Distribution
• Consumables status
• Preventive alarms and alerts

There’s no need to open a user manual to maintain the system – wizards guide you through basic maintenance.

Supported by MyMilli-Q™ Remote Care online monitoring and service capability

Embedded in Milli-Q® HR 7000 systems, MyMilli-Q™ Remote Care is an online service capability that operates as an extension of Milli-Q® Services. MyMilli-Q™ Remote Care lets you securely manage your system from anywhere at any time, supporting your lab’s optimal productivity.

Key features of MyMilli-Q™ Remote Care:

• 24/7 secure online access to real-time system performance data as well as quality reports archived over the last 2 years
• Rapid, online diagnostics—and even remote repair—by our service team
• Receive immediate and customized notifications of system alerts and alarms by email and SMS
• Full data traceability as well as effortless data access and retrieval capabilities facilitate accreditation and reaccreditation processes

Facilitated data management, traceability & compliance

The Milli-Q^® HR 7000 system makes it easier to manage and keep records of your water data, allowing you to be more audit-ready. The system collects all running parameters, including water quality, alarms and events, water usage, and consumables. Up to 2 years of events are stored in the system, which are accessible via the lab’s network or a USB key. Generate automatic e-records and save time, money and paper. This system also facilitates the lab accreditation and re-accreditation processes (ISO 15189).

Milli-Q^® HX 7000 series of high-throughput systems have been designed to deliver the highest pure water quality for your regular laboratory applications and instrument feed. Milli-Q^® HX 7000 systems offer connected, sustainable central pure water solutions for volume needs up to 9000 L daily, making them the perfect choice for large laboratories or lab buildings. Milli-Q^® HX 7000 water quality is ideal for the preparation of reagents and buffers, for microbiology media, hydroponics or histology. It is also the best feed for all Milli-Q^® and high-throughput Super-Q^® ultrapure water systems, as well as equipment such as glassware washers, clinical analyzers, stability chambers, humidifiers, weathering test equipment, autoclaves and hydrogen generators.

Milli-Q^® HX 7000 water • Optimized purification

To reach the most reliable pure water quality, Milli-Q^® HX 7000 systems are built on an optimized purification sequence:

Tap water first enters the Progard^® pretreatment cartridge which efficiently removes particles & colloids, free chlorine and hardness before reverse osmosis (RO) purification. Milli-Q^® HX 7000 systems benefit from advanced RO technology and E.R.A.^® technology, which controls water consumption, and ensures a constant product flow rate and optimal water quality. All prolong the lifetime of the RO membrane and downstream purification technologies. Depending on daily volume needs, Milli-Q^® HX 7000 systems are available in a range of production flow rates (40, 80, 120 or 150 L/h).
The patented Elix^® module further removes ions to typically reach >5 MΩ cm (at 25°C) resistivity. All Milli-Q^® HX 7000 systems are equipped with the best-in-class Elix^® electrodeionization which provides:

• Superior and consistent Type 2 water quality – “Superior,” as resin beads are not degraded by exposure to harsh regeneration chemicals. “Consistent,” as the continuous regeneration avoids the drawbacks of quality variations from resin exhaustion.
• Cost & labor savings – The Elix^® module contains special carbon beads at its cathode and therefore, does not require water softening. Its self-regeneration technology avoids the hassle and costs of DI cartridge replacement. Milli-Q^® HX 7000 is “green,” consuming low energy with a small carbon footprint.
• Long-lasting technology – thanks to its proven design, the module continuously regenerates its resin beads without the need for any maintenance.

Milli- Q^® HX 7000 pure water is irradiated by a bactericidal UV lamp before entering the storage tank, or SDS 500 (storage, protection and distribution system). The SDS 500 reservoir design maintains consistent purity of stored water. Its vent filter provides effective protection against airborne contaminants and the ASM, Automatic Sanitization Module, prevents biofilm formation. Milli-Q^® HX 7000 water can then be sent by a distribution pump to feed instruments or a distribution loop. These can be integrated into a centralized system, providing total control of all parameters within the system itself as well as within the external pure water distribution loop.

Milli-Q^® HX 7000 high-throughput systems are designed to produce up to 9000 L/day of Type 2 water from potable tap feed water to meet or exceed the relevant standards defined by ISO^® 3696 / BS 3997 the European and US Pharmacopoeia, and other international bodies.

Superior communications interface – Interactive touchscreen display

All the details needed for daily operation of the Milli-Q^® HX 7000 system are available at a glance on the system’s large color touchscreen. Several views show:

• Main data (water production status, storage level, dispensing status)
• Consumables exhaustion status
• Alarm & alert status

The system’s dashboard displays information in an easy-to-read format; handy wizards guide users through maintenance procedures with step-by-step procedures.

Supported by MyMilli-Q™ Remote Care online monitoring and service capability

Embedded in Milli-Q^® HX 7000 systems, MyMilli-Q™ Remote Care is an online service capability that operates as an extension of Milli-Q^® Services. MyMilli-Q™ Remote Care lets you securely manage your system from anywhere at any time, supporting your lab’s optimal productivity.

Key features of MyMilli-Q™ Remote Care:

• 24/7 secure online access to real-time system performance data as well as quality reports archived over the last 2 years
• Rapid, online diagnostics—and even remote repair—by our service team
• Receive immediate and customized notifications of system alerts and alarms by email and SMS
• Full data traceability as well as effortless data access and retrieval capabilities facilitate accreditation and reaccreditation processes

Advanced support & validation

A complete range of Milli-Q^® Services, including Validation support, is provided by certified Field Service Engineers using calibrated equipment and Qualification Workbooks. For full confidence in your Milli-Q^® HX 7000 system, it is delivered with a Certificate of Calibration for the built-in temperature and resistivity meters, and a Certificate of Conformity ensuring that it has been built and tested fully assembled following internal Standard Operating Procedures. The manufacturing site is ISO^® 9001 v.2000 and ISO^® 14001 certified.

Purify, store, distribute, AND remotely monitor and control your Type 2 pure water entirely from the Milli-Q^® HX 7000 SD series of all-in-one systems. These fully-integrated purification systems are designed to deliver the highest quality pure water in a complete, compact, connected and fully-customizable format. From a single laboratory to an entire building floor, this range has the capacity to purify up to 3000 L/day from tap water, reliably feeding all your type 2 water needs. This includes instruments, equipment, taps on benches, point-of-use polishers, and ultrapure water purification systems.

Key features of the Milli-Q^® HX 7040 / 7080 / 7120 / 7150 SD systems include:

• Optimal combination of purification technologies for a reliable flow of high quality pure water
• Integrated 140 L reservoir and pump for protected storage and distribution up to 20 L/min
• State-of-the-art sustainable technologies for low and predictable running costs
• Superior communications interface and modern data management capabilities
• Customizable range of options and accessories to meet your specific requirements
• MyMilli-Q™ Remote Care online monitoring and service capability

Milli-Q^® HX 7000 SD systems – Advanced Type 2 water purification

Milli-Q^® HX 7000 SD systems are designed to produce up to 3000 L/day of Type 2 water from potable tap feed water to meet or exceed water quality levels described by ISO 3696, European and US Pharmacopoeia, and other international bodies. This is thanks to advanced and complementary purification technologies that yield reliably pure water at a constant flow rate and with reduced water consumption.

Tap water is first pretreated according to your facility’s feed water quality. Progard^® cartridges efficiently remove particles, colloids, free chlorine and hardness. Additional filters may be added depending on your source water quality.

Advanced reverse osmosis (RO) then removes 95-99% of ions, and 99% of all dissolved organics (>200 Da), microorganisms and particles.

Patented E.R.A.^® (Evolutive Reject Adjustment) technology automatically assesses feed water quality to produce a constant flow rate and optimize water recovery (between 45% and 75%). This saves you water, time and money. Water consumption is reduced by up to 50% compared to other RO systems of similar throughput, and less time is needed to maintain the system because there is no need for manual valve adjustments when the temperature fluctuates. E.R.A.^® technology also reduces waste by prolonging the lifetime of the RO cartridge.

Next, our patented Elix^® electrodeionization (EDI) module removes remaining ions, typically to >5 MΩcm (at 25 °C) resistivity. The best-in-class Elix^® module provides:

• Superior & consistent Type 2 water quality – “Superior” because resin beads are not degraded by exposure to harsh regeneration chemicals. “Consistent,” due to continuous resin regeneration that avoids the drawbacks of quality variations from resin exhaustion.
• Cost & labor savings – Special carbon beads in the module’s cathode eliminate the need for water softening. Self-regeneration technology avoids the hassle and costs of DI cartridge replacement. The system is “green,” consuming low energy with a small carbon footprint.
• Long-lasting technology – The module continuously regenerates its resin beads without the need for maintenance.

Pure water in the Milli-Q^® HX 7000 SD system is irradiated by a bactericidal UV lamp before entering the built-in storage tank. An optional UV lamp can also be placed within the distribution loop to irradiate circulating water before feeding out to instruments and equipment.

Depending on daily volume needs, these systems are available in a range of production flow rates from 40 to 150 L/h.

Complete & compact – Integrated storage & distribution pump

Milli-Q^® HX 7000 SD systems are fully equipped with an integrated 140 L water reservoir for protected storage, plus a distribution pump that provides up to 20 L/min pure water for a loop of up to 50 m long. One system can reliably supply the pure water needs of a large laboratory or an entire floor of a building.

Fully customizable – Accessories to adapt to your requirements

Select from a large range of options and accessories to adapt the Milli-Q^® HX 7000 SD system to meet your specific requirements and environment, and to improve your water quality monitoring. Options include:

• System options (water sensors, alarm outputs, on-demand feed option)
• System care options (RO care options)
• Loop monitor options (Resistivity monitoring, TOC monitoring)
• Loop care options [UV lamp (57W), Opticap^® 0.22 μm filter, sanitary sampling ports, resistivity booster]
• Pre-treatment options (ultrafiltration units)

Superior communications interface – Large touchscreen display

Milli-Q^® HX 7000 SD systems are equipped with a large, colored touchscreen display panel to facilitate maintenance, control and access to data. The user-friendly interactive dashboard lets you easily navigate to all main system data, including:

• System settings
• Production
• Storage levels
• Distribution
• Consumables status
• Preventive alarms and alerts

There’s no need to open a user manual to maintain the system – wizards guide you through basic maintenance.

Supported by MyMilli-Q™ Remote Care online monitoring and service capability

Embedded in Milli-Q® HX 7000 SD systems, MyMilli-Q™ Remote Care is an online service capability that operates as an extension of Milli-Q® Services. MyMilli-Q™ Remote Care lets you securely manage your system from anywhere at any time, supporting your lab’s optimal productivity.

Key features of MyMilli-Q™ Remote Care:

• 24/7 secure online access to real-time system performance data as well as quality reports archived over the last 2 years
• Rapid, online diagnostics—and even remote repair—by our service team
• Receive immediate and customized notifications of system alerts and alarms by email and SMS
• MyMilli-Q™ Remote Care online monitoring and service capability

Eased accreditation – Facilitated data management, traceability & compliance

The Milli-Q^® HX 7000 SD system makes it easier to manage and keep records of your water data, allowing you to be more audit-ready. The system collects all running parameters, including water quality, alarms and events, water usage, and consumables. Up to 2 years of events are stored in the system, which are accessible via the lab’s network or a USB key. Generate automatic e-records and save time, money and paper. This system also facilitates the lab accreditation and re-accreditation processes (ISO 15189).

Technological advances in sensitive analytical techniques, such as inductively coupled plasma mass spectrometry (ICP-MS), graphite-furnace atomic absorption spectroscopy (GF-AAS) and trace ion chromatography (IC), allow us to detect and measure elements at ppt and sub-ppt levels. These trace and ultra-trace detection levels are key for sensitive applications in such diverse fields as environmental testing, pharmaceutical analyses, forensic science, and the food and beverage industry.

Low detection levels mean that special care must be taken to avoid trace contamination, which can impact experimental results. Contaminants may arise from the reagents, instrumentation, operators, lab environment and any sample containers used.

This is equally true for ultrapure water used in the analytical process. Due to the dissolution and dilution processes required in sample preparation, high-purity water typically constitutes over 90% of a sample analyzed by these sensitive techniques. High-purity water is also used for cleaning sample containers, washing plastics, and preparing blanks and standard solutions.

Milli-Q^® IQ Element: Analytical-grade water for single-ppt and sub-ppt detection levels

Laboratories performing trace analyses need a reliable source of ultrapure water with consistently low elemental concentrations. When combined with a Milli-Q^® IQ 7000 or Milli-Q^® IQ 7003/05/10/15 water purification system, the Milli-Q^® IQ Element purification and dispensing unit delivers analytical-grade ultrapure water that is suitable for trace and ultra-trace elemental analyses, including ICP-MS, GF-AAS and trace IC.

The Milli-Q^® IQ Element unit dispenses water at your point of use, which is confirmed to contain extremely low levels of elemental contaminants, from single-ppt to sub-ppt. Independent laboratories specialized in ultra-trace elemental analyses have verified the unit’s water quality (see the Performance Report in the Specifications tab).

Seamless, contaminant-free integration into your cleanroom environment

The compact Milli-Q^® IQ Element unit is designed to be easily integrated into your laboratory space and installed inline of a Milli-Q^® IQ 7 series water purification system. Its compact dispensing unit can be placed directly at your point of use, in your cleanroom environment or laminar flow hood, with no risk of contamination.

1. Milli-Q^® IQ 7003/05/10/15 water purification system purifies tap water to pure (Type 2) and ultrapure (Type 1) water. Flexible installation options give the best fit for any lab’s space, and patented purification technologies ensure consistently high-quality purified water.
2. Milli-Q^® IQ 7003/05/10/15 storage tank safeguards water purity better than ever. The vent filter protects water from airborne contaminants and mercury-free UV lamps prevent bacterial growth and biofilm build up.
3. E-POD^® dispenser gives convenient access to pure water at a high flow rate (up to 2 L/min) for general lab applications. Save time with walk-away filling and an intuitive touchscreen interface.
4. Q-POD^® dispenser delivers ultrapure water for critical applications such as HPLC, UHPLC or cell culture. A range of Application-Paks match water quality to your specific application needs.
5. Milli-Q^® IQ Element purification unit removes trace ionic contaminants. The touchscreen allows water quality monitoring at-a-glance, rapid data management, and intuitive control.
6. Footswitch allows hands-free dispensing at your point of use. There’s no need to touch the unit while working.
7. Milli-Q^® IQ Element dispensing unit can be placed directly at your point of use, in your cleanroom environment or laminar flow hood, with no risk of contamination.

For full confidence that water is not influencing your analyses, the Milli-Q® IX water purification system provides a reliable source of high-quality Type 2 pure water to feed your lab’s needs.

• General laboratory applications: sample, buffer and reagent preparation; glassware rinsing; equipment and instrument feed (e.g. autoclaves, dishwashers, weathering and stability test chambers, clinical analyzers and slide stainers, hydrogen generators, and ultrapure water systems, such as the Milli-Q® IQ 7000 ultrapure water system)
• Sensitive applications: microbiological culture media preparation; staining solutions for histology and cytology; immunohistochemistry; gel electrophoresis, western blotting; immunoassays (ELISA, RIA); dissolution testing; Biological Oxygen Demand (BOD)/ Chemical Oxygen Demand (COD); UV/Vis spectroscopy; titration

The Milli-Q® IX water purification system supports the needs of labs in regulated environments, where compliance, accuracy and efficiency are paramount (e.g. food & beverage, environmental and industrial testing labs; clinical labs; pharma industry). It also supports research and innovation laboratories to discover and develop the next big thing—faster (e.g. academia, research institutes, pharmaceutical research, biotech).