Fitting to your needs and environment
The Pure chromatography instruments are extremely compact, ensure safety on the highest level and are easy to use for any application. With the platform it’s possible to combine different techniques without sacrificing features or functionalities: Flash & prep HPLC and UV & ELS detection. This gives the chemist highest flexibility and helps to achieve the best purification results..
The AirGen series RACK ZA FID is able to remove the total hydrocarbons to less than 0.05 ppm from the external compressed Air. Very compact, the RACK ZA FID Air can purify up to 50 L/min of compressed Air and can bear a pressure up to 6.5 bar (94 PSI). The filtration of the hydrocarbons is performed by using a catalytic oven filled with palladium. The reduction of hydrocarbons, including methane, and carbon monoxide decrease the background noise level and gives much better baseline stability, considerably increasing detector sensitivity and ensuring precise analytical results. High efficiency coalescing pre-filtration and post filtration of particulate size greater than 0.01 microns are used to prevent any kind of particles from entering the analytical device.
The RACK ZA FID has a very simple and efficient interface. It can also be managed by the HydroGen series and is ideal to supply Hydrocarbon free Air to FID detectors.
The suppression of fluorescence can be the decisive advantage in Raman microscopy. The RamanScope III is designed to do just that, providing excellent Raman data even on difficult samples.
The benefits of FT-Raman microscopy are well known:
Providing Consistent, Repeatable Reciprocating Shaking Action for a Variety of Applications
OHAUS Reciprocating Shakers are designed for a range of applications including cell cultures and extraction procedures that require accurate, repeatable results. These shakers provide consistent, uniform shaking action. The back-and-forth reciprocating motion has a 19 mm stroke length. Permanently lubricated ball bearings and a maintenance-free, brushless DC motor provide reliable service and
continuous-duty operation.
RiOs™ Essential systems are ideal for laboratories needing reliable, constant production of Reverse Osmosis, RO (Type 3) water from potable tap water. RO pure water produced by RiOs™ Essential systems is ideal for non-critical laboratory applications, such as:
Glassware rinsing
Hydroponics
Water baths
Feed water for humidifiers, autoclaves, glassware washers, washing machines
Feed water for ultrapure water systems
Systems are available in 5, 8, 16 or 24 liter models to match the specific volume needs of your laboratory.
RiOs™ Essential water • Intelligent purification
RiOs™ Essential is built on an optimized and efficient purification sequence: Tap water first enters the Progard® pretreatment cartridge which efficiently removes particles & colloids, free chlorine and hardness. Pretreated water passes through the reverse osmosis membrane which removes up to 99% of all ionic & organic contaminants, microorganisms and particles. The benefits of RiOs™ intelligent reverse osmosis are:
No risk of water shortage, even in winter – intelligent RO adapts its production rate to tap water temperature.
Continuously, high quality RO permeate – intelligent RO is always working to the best of its ability, discarding primary low-quality permeate, protecting downstream purification technologies.
Environment conscious, water savings – intelligent RO optimizes the recovery of rejected water and in turn maximizes Progard® lifetime.
The Progard® cartridge incorporates RFID technology. This provides instant visibility on cartridge parameters and also ensures a safe & optimal performance of your system, giving you full traceability.
User friendly & easy maintenance
With intuitive controls that simplify operation, RiOs™Essential is user-friendly, and provides just the information required. A color-coded backlit LCD display clearly shows message importance for system alert and alarm icons. With its small footprint, RiOs™ Essential system enables installation wherever it is convenient in your laboratory — on or under the bench, or on a wall. A single replaceable cartridge allows your system to run smoothly all year long while preserving your budget. Millitrack® e-Solutions provide enhanced data management control, remote access capabilities to the system dashboard, and long-term electronic archiving for your RiOs™Essential.
Quality certificates
For full confidence in your RiOs™ Essential system, it is delivered with a Certificate of Calibration for the built-in temperature and resistivity meters, and a Certificate of Conformity ensuring that it has been built and tested fully assembled following internal Standard Operating Procedures. In addition all RiOs™ Essential consumables are delivered with their Certificate of Quality. The manufacturing site is ISO® 9001 v.2000 and ISO® 140001 certified.
Reliable Rocking and Waving Shakers with Simple Adjustments for Tilt Angle and Speed
OHAUS Rocking and Waving Shakers are innovatively designed for use in a wide range of lab applications. Rocking Shakers provide controlled seesaw-like motion, while Waving Shakers offer a smooth, low-foaming, 3D wave motion. Available in microprocessor-controlled digital models and economical non-digital models. All models include a non-slip mat, and most models are available with a stacking tray option to easily double the capacity.
Portable Precision Balances Perfect for Classroom Use
Designed for education applications, the OHAUS Scout with a large backlit LCD backed by education software is the ideal balance for your classroom.It is built to endure demanding classroom applications with superior overload protection. Features including faster stabilization time, increased capacity, multiple connectivity options, and a stackable design make Scout the best weighing experience for the next-generation classroom.
Portable Precision Balances Provide Consistently Accurate Measurements
Ideal for laboratory and industrial applications, the OHAUS Scout comes in a slim, stackable design with a large backlit LCD. Features include superior overload protection, multiple weighing units, and application modes. Geared for high performance in your facility with fast stabilization time and high-resolution weighing results, these portable balances set a new standard in laboratory and industrial weighing.
High-Performance Portable Balances with Intuitive Touchscreens for High Accuracy and Productivity
Ideal for laboratory and industrial applications, the OHAUS Scout features an easy-to-navigate color touchscreen display and a slim design that allows stackable storage. Geared for superior performance with fast stabilization time and high-resolution weighing results, these portable balances set a new standard for a broad range of weighing applications. Features also include superior overload protection and expanded connectivity options.
The SENTERRA II is a confocal Raman microscope designed for straightforward, non-stop operation. Its high degree of automation allows fast and easy Raman imaging for failure analysis, quality control and scientific research. First, the SENTERRA II is fully automated, including self-diagnosis and instrument tests like OQ and PQ. Change a laser with a simple mouse click, and afterwards, the filter and grating are adjusted automatically.Naturally, the SENTERRA II offers excellent sensitivity combined with pristine spectral and Raman Imaging performance. But the real powerhouse of this confocal Raman microscope is our SureCalTM technology.Let us briefly repeat one of the most important principles of Raman technology: External factors affect the optical and mechanical components in every Raman microscope, especially heat, component changes and vibrations. Ultimately, this induces wavenumber shifts, which must be compensated by regular recalibrations.
The SmartProber-P1 is aimed at the next-generation over 5.5 kOe. Various configurations of this type of SmartProber are available. If the high perpendicular field is required, but only small samples need to be measured, the automated wafer stage can be replaced with a cheaper manual stage.
SP-P1 – 6kOe magnet, 300mm rotary wafer-stage
Configuration options:
C: Additional in-plane magnet module with a field strength of 2kOe
Y: 200mm XY wafer-stage
M: Manual wafer-stage for small samples
L: 10kOe magnet
This low-cost table-top equipment comes with manual x-y positioning, fully automated probe landing, an in-plane magnet as well as an anti-vibration table. The open nature, low cost, and versatility make the
SmartProber-TT especially suited for research and/or development.
Sample size: up to 6″ wafers, up to 1.3 mm thickness
The Sonimix 2106 is a gas mixer mainly used to calibrate and linearize gas monitors and to generate specific gas mixtures .
The Sonimix 2106 is based on the principle of gas flow through sonic nozzles and is built according the ISO 6145/6 standard. The sonic nozzle principle makes it the most accurate and stable device on the market. It generates binary mixtures from 0 to 100% in fixed steps in a pure mechanical process without electronic regulation and without any influence from ambient pressure or temperature.
The touch-screen LCD interface provides simple and user-friendly management of all functions on the unit.
Optional Auto Diagnostic functions for quick check of the instrument performances (patented) is available.
Optional Nox converter tester.
Proven metrological performances – Optional ISO 17025 calibration reports will be delivered from our accredited laboratory. In this way the device can be easily linked with National Standards (NIST, METAS, UKA, etc)
The Sonimix 2130 NOx converter tester has been designed to generate a stable NO2 concentration with a small reaction time. It is based on the sonic nozzles technology (ISO 6145-6 technology) and high stability pressure regulators.
The NOx converter tester is often used together with a multi-steps gas divider also based on sonic nozzles and high precision pressure regulators.
In order to validate NOx measurements, the efficiency of the NO2 converter must be higher than 90 %, it is therefore very important to check easily and precisely the efficiency of the NO2 converter.
The SONIMIX 2130 converter tester is based on the process known under the name of Gaseous Phase Titration
The multigas calibrator with GPT, ozone and self re-generable zero air generator, Sonimix 3012/3022, is an instrument designed to calibrate manually or by remote control up to 6 monitors installed in an air pollution monitoring station, such as SO2, HC, BTX, CO, NOx and O3.
The Sonimix 3012/3022 is equipped with
– an inlet for high concentration mixtures of diluted gases such as NO, NO2, SO2, CO, HC, BTX or mixtures of several compatible polluants in the same cylinder.
– a zero air generator composed of an internal compressor with self re-generable filters that removes moisture, O3, NOx, SO2, HC, BTX and optionally CO and CH4.
– a binary gas dilutor with two inlets (diluted gas and air), based on sonic nozzles (ISO 6145-6 standard)
The ozone generator is regulated by UV-light feedback and compensated from the atmospheric pressure and ambient temperature variations, with alarm on the drift of UV-light as well as the circuits for the GPT.
The SONIMIX 3030 is a 1-point dilution system designed for gas calibration and testing applications. Based on the principle of sonic nozzles with back pressure compensation, it ensures highly accurate and stable flow without the need for electronic regulation.
The unit is equipped with two manual 2/2 valves at the inlet and operates through a purely mechanical process, making it reliable and completely independent from ambient pressure or temperature variations.
This model has been designed for applications that request only 1 concentration. The advantage is being the use of high concentration cylinders (pure, in %, ppm or ppb) and dilute it up to 1/1000.
This method will increase the gas stability and save the consumption of the expensive gas.
The self-regenerable zero air generator SONIMIX 3052/3057 is designed to supply high-purity air without the need for pressurized cylinders.
Optimized for use in Air Pollution Monitoring (APM) networks, this unit is the ideal companion to SONIMIX calibrators and gas dividers, including SONIMIX 3022, SONIMIX 6000 C2, and PermaCal systems.
SONIMIX 3052/3057 provides high-quality carrier or zero air for a wide range of gas analyzers. The unit filters, dries, and cleans ambient air from pollutants including HC, CH₄, CO, NO, NO₂, O₃, and SO₂. Air is compressed (internally), filtered, dried via a self-regenerating molecular sieve, and purified through a multistage scrubber system, including an optional hot catalysis module.
The Sonimix 4001 is a stand alone ozone primary transfer standard able to generate ozone together with dry or wet air (optional) allowing to calibrate the ozone monitors in several points. It generates an outflow of 3 Nl/min air containing 10 to 1000 ppb O3, with stability and reproducibility of the concentration better than 1% relative. The extended range model generates 10 ppb to 10 ppm at 3 L/min and 10 ppm to 35 ppm at 0.9 L/min.
The Sonimix 4001 is using pressure regulator and sonic nozzles and an ozone generator including thermostatisation and regulation by UV light photometer measurement with atmospheric pressure and temperature corrections (US EPA method of UV absorption by ozone, Beer-Lambert law). The ozone analyser is built with 1 reference UV light detectors that measure in alternance the UV intensity without any ozone and then the same UV light but through the generated ozone. With these 2 values, the processor calculates the amount of ozone generated.
The multipoint multigas calibrator SONIMIX 6000C1 is an instrument designed to calibrate manually or by remote control up to 5 gas monitors installed in an Air pollution monitoring station, such as SO2, HC or BTX, CO, NOx and O3.
With the optional Ozone generator and GPT circuitry it is possible to verify the coherence of NO, NO2 and O3 analysers, and to determine the converter’s efficiency of the NOx monitors.
The interface allows to Configure the calibrator and to perform the manual operations of calibrations and GPT necessary after the maintenance process on the analysers.
Equipped with a binary gas mixer, based on high precision mass flow controllers and mechanical pressure regulators the SONIMIX 6000C1 can generate accurate dilution to low ppb level.
Options :
– Permeation oven of different sizes and material (up to 3 permeation oven per device), with a specific oven able to contain up to 6 BTEX permeation tubes.
– Ozone generator and GPT circuits.
The multigas Sonimix 6000 C2 calibrator is designed to calibrate manually or by remote control up to 6 monitors installed in an air pollution monitoring station, for parameters such as SO2, HC, BTX, CO, NOx and O3.
The Sonimix 6000 C2 includes Mass Flow Controllers, GPT, ozone and self re-generable zero air generator and is equipped with
– an inlet for high concentration mixtures of diluted gases such as NO, NO2, SO2, CO, HC, BTX or mixtures of several compatible pollutants in the same cylinder.
– a zero air generator composed of an internal compressor with self re-generable filters, removes following components: moisture, O3, NOx, SO2, HC, BTX and optionally CO and CH4.
– a binary gas dilutor of two inlets (diluted gas and air), including 2 Mass Flow Controllers to generate the zero and other dilutions ratios going from 1/100 to 1/1000 (other values upon request).
The input pressures are monitored by two pressure switches. The ozone generator is regulated by UV-light feedback and is compensated from the atmospheric pressure and ambient temperature variations. It includes alarm on the UV power drift as well as the circuits for the Gas Phase Titration (GPT).
The Sonimix 7050 is a simplified gas mixer based on the principle of gas stream through mass flow controllers (MFC) and mainly used to calibrate and linearize Gas Monitors. Built according to the ISO 6145/7 normalization, the Sonimix 7050 is totally compatible with the US EPA methods and can be easily linked with National Standards (NIST, METAS, UKAS…).
The Sonimix 7050 Multi range gas mixer performs a large range of gas mixtures from high concentration gas cylinders
The Sonimix 7100 is a gas mixer mainly used to calibrate and linearize gas monitors and to generate specific gas mixtures .
The Sonimix 7100 is based on the principle of gas flow through MFC (Mass Flow Controllers) and is built according the ISO 6145/7 standards. This instrument provides a very high flexibility allowing to combine multigas mixtures (up to 5 gases + a balance gas) and multi-range functionality.
The touch-screen LCD interface provides simple and user-friendly management of all functions on the unit.
All models make automatic calculation in function of the used gases types. The Sonimix 7100 is totally compatible with the US EPA methods and can be easily linked with National Standards (NIST, METAS, UKAS…)
Each mass flow controller is factory calibrated in 10 points by a traceable primary standard.
The top-of-line SPECTRO ARCOS ICP-OES analyzer evolves elemental analysis to the next level
New dual side-on interface (DSOI) adds sensitivity and eliminates contamination/matrix compatibility issues.
One instrument instead of two: Only MultiView plasma instrument in the market – true axial and true radial (single or dual) plasma observation in one instrument.
ORCA Optical System: Simultaneous spectrum capture in the 130–770 nm wavelength range with up to 5× more sensitivity than Echelle-based systems – delivers best-in-class performance in the UV/VUV range.
Small spot energy dispersive X-ray fluorescence (ED-XRF) spectrometer optimized for precious metal testing and compliance screening
The market recognized gold standard for element analysis of precious metals.
Wide scope of > 30 elements backed by extensive factory calibrations providing the best accuracy for traces and majors.
Up to a factor of 3 shorter measurement times: choose exceptional results at conventional measurement times, or conventional results at exceptional measurement times.
