The high quality of the materials combined with cutting-edge technology of the compressor unit, ensure reliability, professionalism and economy allowing continuous use, unthinkable in traditional direct-drive oil-free compressors.
The AirGen OFCAS 35 PLUS is the ideal compressor to supply all Zero Air generators ZA FID and ZA TOTAL or the high purity Nitrogen generator NG EOLO.
The high quality of the materials combined with cutting-edge technology of the compressor unit, ensure reliability, professionalism and economy allowing continuous use, unthinkable in traditional direct-drive oil-free compressors.
The AirGen OFCAS 60 is the ideal compressor to supply all Zero Air generators ZA FID and ZA TOTAL or the high purity Nitrogen generator NG EOLO.
The high quality of the materials combined with cutting-edge technology of the compressor unit, ensure reliability, professionalism and economy and allows continuous use, unthinkable in traditional direct-drive oil-free compressors.
The AirGen OFCAS RACK is the ideal compressor to supply all Zero Air generators ZA FID and ZA Total or the high purity Nitrogen generator NG EOLO.
A scroll compressor uses two interleaving scrolls to compress air. Devices using this technology are known for operating more smoothly, quietly, and reliably than conventional piston compressors. Unlike pistons, the orbiting scroll’s mass can be perfectly counterbalanced, with simple masses, to minimize vibration. The scroll’s gas processes are also more stable and continuous. Additionally, a lack of volume gives an increased volumetric efficiency.
These Compressors can provide up to 200 l/min of compressed air at a pressure of 10bar (145psi).
The units equipped with Dryer can reach a Dew-point value <-20°C (<-4°F). This module, installed internally, avoid the installation of supplementary external fridge module that requires specifically trained personnel.
The electronic controls and inverter technologies to control the motor make higher efficiency and reliability of the product. The touch-screen LCD interface provides simple and user-friendly management of all functions on the unit.
The AirGen OFCAS Scroll iQ is the ideal compressor to supply the Nitrogen generators series NG CASTORE (membrane) for LC/MS applications.
The BEAM 1.0 performs in 24/7 production process worldwide with utmost reliability. Even under the most challenging environments Beam 1.0 guarantee frictionless industrial use for different applications (example: high power UV-lasers (>300 nm)). The Generator produces a continuous flow of hydrocarbon-free air. The flow is controlled stable. All Generators reduce the total quantity of hydrocarbons to less than 0,01 ppm, establishing a stable flow for your application. Zero-air produced in this way replaces existing stocks of synthetic air stored in high pressure bottles.
Laser Gas Generators are designed specifically to supply clean, dry, hydrocarbon-free air to be used for several applications.
LNI Swissgas recognizes the importance of having a safe, reliable and cost effective supply of high-purity Zero Air.
In addition providing flexibility to add or remove modules as your application requirements evolve over time.
The BEAM 1.1 performs in 24/7 production process worldwide with utmost reliability. Even under the most challenging environments BEAM 1.1 guarantee frictionless industrial use for different applications (example: high power UV-lasers (>300 nm)). The Generator produces a continuous flow of hydrocarbon-free air. The flow is controlled stable. All Generators reduce the total quantity of hydrocarbons to less than 0,01 ppm, establishing a stable flow for your application. Zero-air produced in this way replaces existing stocks of synthetic air stored in high pressure bottles.
Laser Gas Generators are designed specifically to supply clean, dry, hydrocarbon-free air to be used for several applications.
LNI Swissgas recognizes the importance of having a safe, reliable and cost-effective supply of high-purity Zero Air.
In addition, providing flexibility to add or remove modules as your application requirements evolve over time.
The BEAM 2 series perform in 24/7 production process worldwide with utmost reliability. Even under the most challenging environments BEAM 2 series guarantee frictionless industrial use for different applications (example: high power UV-lasers (>300 nm)). The Generator produces a continuous flow of hydrocarbon-free air. The flow is controlled stable. All Generators reduce the total quantity of hydrocarbons to less than 0,01 ppm, establishing a stable flow for your application. Zero-air produced in this way replaces existing stocks of synthetic air stored in high pressure bottles.
Laser Gas Generators are designed specifically to supply clean, dry, hydrocarbon-free air to be used for several applications.
LNI Swissgas recognizes the importance of having a safe, reliable and cost-effective supply of high-purity Zero Air.
In addition, providing flexibility to add or remove modules as your application requirements evolve over time.
The BEAM 2.0 performs in 24/7 production process worldwide with utmost reliability. Even under the most challenging environments BEAM 2.0 guarantee frictionless industrial use for different applications (example: high power UV-lasers (>300 nm)). The Generator produces a continuous flow of hydrocarbon-free air. The flow is controlled stable. All Generators reduce the total quantity of hydrocarbons to less than 0,01 ppm, establishing a stable flow for your application. Zero-air produced in this way replaces existing stocks of synthetic air stored in high pressure bottles.
Laser Gas Generators are designed specifically to supply clean, dry, hydrocarbon-free air to be used for several applications.
LNI Swissgas recognizes the importance of having a safe, reliable and cost-effective supply of high-purity Zero Air.
In addition, providing flexibility to add or remove modules as your application requirements evolve over time.
The BEAM 3.0 perform in 24/7 production process worldwide with utmost reliability. Even under the most challenging environments BEAM 3.0 guarantee frictionless industrial use for different applications (example: 3D Laser Printer / 3D Laser melting). The Generator produces a continuous flow of Nitrogen with Laser Grade. The BEAM 3.0 has been developed to meet specific requirements in term of gas, flow, purity and pressure for Laser applications. This generator is equipped with a scroll built-in oil less compressor with inverter technology.
The exclusive electronic flow control combined with the compressor control by the inverter allows to generate Nitrogen with a higher purity using a smaller volume at less pressure of air which results in reduced energy costs and increase the life time of the compressor.
LNI Swissgas recognizes the importance of having a safe, reliable and cost-effective supply of high reliable Nitrogen for Lasers.
In addition, providing flexibility to add or remove modules as your application requirements evolve over time.
The BEAM 3.1 perform in 24/7 production process worldwide with utmost reliability. Even under the most challenging environments BEAM 3.1 guarantee frictionless industrial use for different applications (example: 3D Laser Printer / Powder Handling). The Generator produces a continuous flow of Nitrogen with Laser Grade. The BEAM 3.1 has been developed to meet specific requirements in term of gas, flow, purity and pressure for Laser applications. This generator is equipped with a high efficient membrane system.
The exclusive electronic flow control allows to generate Nitrogen with a higher purity using a smaller volume at less pressure of air which results in reduced energy costs..
LNI Swissgas recognizes the importance of having a safe, reliable and cost-effective supply of high reliable Nitrogen for Lasers.
In addition, providing flexibility to add or remove modules as your application requirements evolve over time.
The BEAM 4 series perform in 24/7 production process worldwide with utmost reliability. Even under the most challenging environments BEAM 4 series guarantee frictionless industrial use for different applications (example: high power UV-lasers <266 nm / Optical Parametric Amplifiers). The Generator produces a continuous flow of Nitrogen with High Purity Laser Grade. The BEAM 4 series has been developed to meet specific requirements in term of gas, flow, purity and pressure for Laser applications. This generator is equipped with a smart low noise built-in pistons compressor, 100% oil-free.
The BEAM 4 series remove oxygen from air to less than 5 ppm and HC pollutants to less than 0.1ppm
LNI Swissgas recognizes the importance of having a safe, reliable and cost-effective supply of high reliable Nitrogen for Lasers.
In addition, providing flexibility to add or remove modules as your application requirements evolve over time.
The LNI demineralizators HLP series are able to supply purified water for instrumental and analytical purposes matching requirements of every modern laboratories. Conductivity of obtained water does not exceed 0.06 µS/cm, so it is applicable for PN-EN ISO 3696:1999, ASTM, CLSI, FP standards.
The system is the ideal water purification system for AAS, ICP/MS, IC, HPLC, GC instrumental analyses. Our demineralizators are equipped with a microprocessor control and measurement system. The LCD interface provides simple and user-friendly management of all functions on the unit.
The LNI demineralizators HLP UV series are able to supply purified water for instrumental and analytical purposes through the technique of ultraviolet (UV) lamp, matching requirements of every modern laboratories. Conductivity of obtained water does not exceed 0.06 µS/cm, so it is applicable for PN-EN ISO 3696:1999, ASTM, CLSI, FP standards.
The system is the ideal water purification system for AAS, ICP/MS, IC, HPLC, GC instrumental analyses, bacteria cultures, biochemical analyses and for general-purpose research. Our demineralizators are equipped with a microprocessor control, a measurement system and 2 independ water intake points:
Second purity class (ISO 3696:1999, ASTM, CLSI).
First purity class (ISO 3696:1999, EP)
The LCD interface provides simple and user-friendly management of all functions on the unit.
H2 POWER 10L is a system able to provide up to 1Nm3/h of hydrogen. The hydrogen is produced from three Hydrogen Generators “6920.16.330” connected in parallel mode. 6920.16.330 uses an electrolytic cell with polymeric membrane (PEM) to produce pure hydrogen from distilled water. No acid or alkaline solutions are used.
It is provided with an internal 1.1 litres tank with electronic level control and an automatic fill function “Autorefill” from an external source. Its innovative gas drying system is completely maintenance-free and allows continuous operation, 24 hours a day. The exclusive, electronically-controlled, gas/liquid separator automatic checks for internal leaks whenever starting the unit, and a constant control of operating parameters guarantees maximum safety. The touch-screen LCD interface provides a direct simple control and management of all functions on the unit.
The RS232 and LAN ports allow a remote control of the system from anywhere in the world.
This H2-SENSOR Kit is a security system that constantly detects the amount of Hydrogen present in the working environment of the GC and blocks the Hydrogen generation if it detects an amount greater than the safety threshold.
The 6940.00.055 controller reads the percentage of Hydrogen measured by the sensor 6940.00.060 and, if the value exceeds the threshold alarm, the Controller deactivates the solenoid valve in the 6940.00.056 block.
The alarm can be signaled to a PC and to a remote device.
This H2-SENSOR Kit is a security system that constantly detects the amount of Hydrogen present in the GC’s oven and blocks the Hydrogen generation if it detects an amount greater than the safety threshold.
The 6940.00.055 controller reads the percentage of Hydrogen measured by the sensor 6940.00.070 and, if the value exceeds the threshold alarm, the Controller deactivates the solenoid valve in the 6940.00.056 block. The alarm can be signaled to a PC and to a remote device.
Sensor 6940.00.070 is engineered to work in standalone mode connected by RS-485 network to a Hydrogen Generator. The sensor can be connected directly with the LNI Hydrogen Generators. When the hydrogen concentration detected exceeds a threshold of safety, the Hydrogen Generator automatically stops the production and audible and visual alarms will be reported.
The HydroGen series HG 4U PRO is able to generate 2000 cc/min of Hydrogen with purity better than 99.99999% and pressure up to 16 bar (232 PSI). The HG 4U PRO includes an electrolytic cell with polymeric membrane (PEM) using distilled water. The two-column PSA drying system with automatic regeneration ensures the maximum grade of hydrogen purity, and is completely maintenance-free. The HG 4U PRO is the ideal Hydrogen for all GC-FID detectors. The on-board CPU constantly control the operating parameters to guarantee full safety. The touch-screen LCD interface provides simple and user-friendly management of all functions on the unit.
The HydroGen series HG 5U PRO 3300 V4 is able to generate 3300 cc/min of Hydrogen with purity better than 99.99999% and pressure up to 16 bar (232 PSI). The HG 5U PRO includes an electrolytic cell with polymeric membrane (PEM) using distilled water. The two-column PSA drying system with automatic regeneration ensures the maximum grade of hydrogen purity, and is completely maintenance-free. The HG 5U PRO is the ideal Hydrogen for all GC-FID detectors. The on-board CPU constantly controls the operating parameters to guarantee full safety. The touch-screen LCD interface provides simple and user-friendly management of all functions on the unit.
The HydroGen series HG 5U PRO 4000 is able to generate 4000 cc/min of Hydrogen with purity better than 99.99999% and pressure up to 16 bar (232 PSI). The HG 5U PRO includes an electrolytic cell with polymeric membrane (PEM) using distilled water. The two-column PSA drying system with automatic regeneration ensures the maximum grade of hydrogen purity, and is completely maintenance-free. The HG 5U PRO is the ideal Hydrogen for all GC-FID detectors. The on-board CPU constantly controls the operating parameters to guarantee full safety. The touch-screen LCD interface provides simple and user-friendly management of all functions on the unit.
The HydroGen series HG BASIC is able to generate up to 700 cc/min of Hydrogen with purity better than 99.9999% and pressure up to 10 bar (145 psi). The HG BASIC includes a new long life multilayer electrolytic cell with polymeric membrane (PEM) using distilled water. No acid or alkaline solutions are used.
The innovative drying system ensures the maximum grade of hydrogen purity, protects the GC thanks to its innovative humidity safe guard, HG BASIC is completely maintenance-free and allows continuous operation, 24 hours a day. The on-board CPU automatically check for internal leaks and constantly control the operating parameters to guarantee full safety.
Up to 20 units can be connected in parallel mode using an external control box. The touch-screen LCD interface provides simple and user-friendly management of all functions on the unit.
Stackable with various other models: AG-OFCAS35; NG-EOLO; AG-ZA-Fid.
The HG KUBE is able to generate up to 260 cc/min of Hydrogen with purity better than 99.9996% and pressure up to 9 bar (130 psi). The HG KUBE includes a cell with polymeric membrane (PEM) using distilled water. No acid or alkaline solutions are involved.
The innovative static drying system ensures the maximum grade of hydrogen purity, protects the GC thanks to it’s unique humidity safe guard, it is completely maintenance-free and allows continuous operation, 24 hours a day.
The on-board CPU automatically checks for internal leaks and constantly control the operating parameters to guarantee full safety. Up to 20 units can be connected in parallel mode using an external control box. The touch-screen LCD interface provides simple and user-friendly management of all functions on the unit.
The HG KUBE V2 is able to generate up to 300 cc/min of Hydrogen with purity better than 99.9996% and pressure up to 10 bar (145 psi). The HG KUBE V2 includes a cell with polymeric membrane (PEM) using distilled water. No acid or alkaline solutions are involved.
The innovative static drying system ensures the maximum grade of hydrogen purity, protects the GC thanks to its unique humidity safe guard, it is completely maintenance-free and allows continuous operation, 24 hours a day.
The on-board CPU automatically checks for internal leaks and constantly control the operating parameters to guarantee full safety. Up to 20 units can be connected in parallel mode using an external control box. The touch-screen LCD interface provides simple and user-friendly management of all functions on the unit.
The HG MINI is able to generate up to 300 cc/min of Hydrogen with purity better than 99.9995% and pressure up to 12 bar (174 psi). The HG MINI includes a cell with polymeric membrane (PEM) using distilled water. No acid or alkaline solutions are involved.
The innovative static drying system ensures the maximum grade of hydrogen purity, protects the GC thanks to it’s unique humidity safe guard.
The on-board CPU automatically checks for internal leaks and constantly control the operating parameters to guarantee full safety. Up to 20 units can be connected in parallel mode using an external control box. The LED matrix interface provides a simple and immediate display of the status of the unit
The hydrogen generators of the series HG PRO is able to generate up to 1500 cc/min of Hydrogen with purity better than 99.99999% and pressure up to 16 bar (232 psi). The HG PRO includes a new long life multilayer electrolytic cell with polymeric membrane (PEM) using distilled water. No acid or alkaline solutions are used.
The innovative gas drying system (two-column drying PSA system with automatic regeneration) ensures the maximum grade of hydrogen purity, it is completely maintenance-free and allows continuous operation, 24 hours a day. The on-board CPU automatically check for internal leaks and constantly control the operating parameters to guarantee full safety.
Up to 20 units can be connected in parallel using an external control box. The touch-screen LCD interface provides simple and user-friendly management of all functions on the unit.
Stackable with various other models: AG-OFCAS35; NG-EOLO; AG-ZA-Fid
