BEAM 3.1

0.00

The BEAM 3.1 perform in 24/7 production process worldwide with utmost reliability. Even under the most challenging environments BEAM 3.1 guarantee frictionless industrial use for different applications (example: 3D Laser Printer / Powder Handling). The Generator produces a continuous flow of Nitrogen with Laser Grade. The BEAM 3.1 has been developed to meet specific requirements in term of gas, flow, purity and pressure for Laser applications. This generator is equipped with a high efficient membrane system.
The exclusive electronic flow control allows to generate Nitrogen with a higher purity using a smaller volume at less pressure of air which results in reduced energy costs..

LNI Swissgas recognizes the importance of having a safe, reliable and cost-effective supply of high reliable Nitrogen for Lasers.

In addition, providing flexibility to add or remove modules as your application requirements evolve over time.

Categories: Gas Generators for Laser, Premium Laboratory Gas Generators

Description

Model: BEAM 3.1  8,0 bar
N2 Outlet
Flow rate (max) 500 l/min
Outlet pressure (min;max) Inlet pressure – 0,5 bar
Nitrogen purity 99,5%
Air inlet
Air inlet requirement Particulate: <1 micron
Dewpoint: <-20°C (68°F)
Oil: <0.01 mg/m³
Flow rate (max) 2200 l/min @ 500 l/min N2
Supply pressure (min/max) 8,5 bar
Temperature (min/max) 1°C (34°F) / 45°C (113°F)
Communication
LCD with touchscreen Standard
RS485 Standard
RS232 For service
General data
Supply rating 100-240Vax 50/60 Hz – 1A
Connection type IEC320-C13
Installation power 25W (30VA)
Fuse rating 1A – 240 Vac (5x20mm)
Connections
N2 Outlet port 1/4″ BSPP female
Air inlet port 1/4″ BSPP female
Drain port 1/4″ BSPP female
Operating/Storage conditions
Temperature 5-35°C
Humidity (max) 80% at 25°C (77°F) (non condensing)
Noise No noise (no mechanical moving parts)
Ip rating IP20
Pollution degree rating 2 (with no aromatic compunds)
Altitude < 2000m

 

Related Products

  • NG RACK 4U C
  • NG RACK 5U
  • NG RACK 7U
  • NG SIRIO